 |
|
|
Nickel Alloy |
|
|
Carpenter Nickel 200 alloy is a commercially pure nickel that exhibits good corrosion resistance. It is ferromagnetic and has relatively low electrical resistivity. This combination of properties has allowed its use in a wide variety of applications.
Because the alloy displays good corrosion resistance, it has been used in food handling equipment, caustic solution, and general corrosion-resistant parts and structures. The magnetic and mechanical properties have enabled it to be used in devices requiring magnetic actuated parts.
The excellent combination of properties enables Carpenter Nickel alloy to be cold worked by forming and drawing. It is readily welded and will retain its properties at both sub-zero and elevated temperatures. Its low electrical resistivity has allowed its use as conducting leads and terminals in electrical and electronic components.
Because of its magnetostrictive properties (especially significant length change when magnetized), the nickels have been used in sonic devices such as sonar or for control sin ultrasonic welding.
Carpenter Nickel alloys meets the requirements of ASTM Specification B-160.
Carpenter Nickel alloy is a low carbon modification of Carpenter Nickel 200 alloy that has found applications in the electronic industry at temperatures up to 1200°F (649°C). It is preferred to Carpenter Nickel 200 alloy above 600°F (315°C), because of its better resistance to "creep."
This alloy has a low annealed hardness and very low work- hardening rate that is desirable for cold forming operations such as deep drawing, spinning, coining, etc. It has been used in corrosion-resistant equipment such as caustic evaporators, in spun anodes, combustion boats and laboratory crucibles, and electronic components where its excellent fabricating characteristics provide some advantage.
|
|
|
|
Nickel Rods And Fasteners
|
|
We offer high quality nickel rods are available in the grades like nickel 200 (UNS No. N02200), nickel 201 (UNS No. N02201), nickel 205 (UNS N02205)
Fasteners
Nickel Fasteners are available in the following type :-
• Stud Bolts
• Hex Bolts
• Square Bolts
• Hex Nuts
• T-Head Bolts
• Friction Grip Bolts
• Structural Bolts
• U-Bolts
• J-Bolts
• Tie Bolts
• Eye Bolts
• Foundation Bolts
We also manufacture and supply nickel fasteners as per drawing and customers specifications.
These nickel fasteners are available in the following grades:
• Nickel 200 (UNS No. N02200), nickel 201 (UNS No. N02201), nickel 205 (UNS N02205)
|
|
|
Nickel alloys pipe and tube fittings are available in below mentioned grades and specifications:-
Range : 15 mm NB up to 100 mm NB in 2000 LBS, 3000 LBS, 6000 LBS & 9000 LBS, 150 LBS, 250 LBS. Available with MACE MR 01-75
Forms : elbow 90 deg, elbow 45 deg, cross, tee, coupling, half coupling & cap
Grades:-Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),Nickel 205 (UNS N02205)
|
|
|
Nickel alloy pipes are available in capillary tube, cupro nickel tube, de-oxide copper tube specialization. | Material | Size | Sch. | Specification | | Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex | 15 NB
to
150 NB | Sch. 10
Sch. 40
Sch. 80 Etc. | IS
BS
ASTM
UNS |
Grades
| Nickel Alloy in Grades | Cupro Nickel (UNS No. : Alloy 706, Alloy 715, Alloy 71640),
Hastelloy (UNS No. : N10665, N10276, N06455),
Nickel (UNS No. : N02200,N02201, N02205),
Monel (UNS No. : N04400, N05500),
Inconel (UNS No. :N06600, N06601, N06625,
N08800, N08825), Titanium, Alloy 20, etc. |
In Form:
Round, square, shaft, coil.
Length:
Standard & cut length.
Value Added Service:
• Draw & expansion as per required size & length.
• Polish (electro & commercial) heat treatment.
• Bending, annealed & pickled & machining, etc.
Test Certificate:
• Manufacturer Test Certificate
• Laboratory Test Certificate from Govt. Approved Lab.
• Under Third Party Inspection.
|
|
|
Nickel Alloy Tubes
|
|
The nickel alloy tubes comes in standard & cut length : | S.No. | Material | Size | Sch. & Swg. | Specification | Manufacturer | | 1 | Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Titanium
Alloy 20
S.S. 904L
Duplex | 6.35 mm OD
To
152 mm OD | 20 Swg.
18 Swg.
16 Swg.
14 Swg.
12 Swg.
10 Swg. | IS
BS
ASTM
UNS | Imported
&
Indian Mfg |
Nickel Alloy in Grade:
• Cupro Nickel: BS 2871/ PART 3 CN 102,107, 108 (90/10, 70/30, 66/30/2/2)
ASTM B 111 C 70600, 71500, 71640
• Titanium: ASTM B 338 Gr. 1, 2, 3, 7, 9, 11, 12
• Hastelloy: C-4, C-22, C276, B-2,
• Nickel: ASTM B 161- 200 & 201,
• Monel: ASTM B 165 -400 & K500,
• Inconel: 600, 601, 625 & 825,
• Incolloy: 800, 800H
• Alloy 20
• Duplex Steel
• SS 904L
In Form:
Round, square, coil, U shape.
Value Added Service:
• Draw & expansion as per required size & length.
• Bending, annealed & pickled, sand blasting & machining, etc.
Test Certificate:
• Manufacturer Test Certificate
• Laboratory Test Certificate from Govt. Approved Lab.
• Under Third Party Inspection.
Specialize:
• Cupro nickel tube
• Shipping
• Offshore construction
• Condensers
• Heat exchangers, etc.
|
|
|
We offer superior quality nickel alloy flanges which can be availed in various shapes and sizes. These stainless steel flanges can be availed in various grades. | Material | Size | Class | Specification | Items | | Cupro-Nickel
Hastelloy
Nickel
Monel
Inconel
Alloy 20
Duplex | 15 NB
to
300 NB | 150#
300# | ASTM
BS
DIN | SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing | | ASA 150, 300
Table D, E, F,
H, DIN, ND-6,
10, 16, 25, 40 | SORF, BLRF, LAP Joint Etc. |
Grade:
1. Cupro Nickel (90/10, 70/30, 66/30/2/2)
2. Hastelloy (C-4, C-22, C276, B-2)
3. Nickel (200 / 201 / 205)
4. Monel (400 & K500)
5. Inconel (600, 601, 625 & 825)
6. Incolloy (800, 800H)
7. Alloy 20
8. Duplex Steel
9. SS 904L
10. Titanium (1 & 2) Etc.
In Form:
SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle Etc.
|
|
|
Our range of nickel alloy plates are available in 2B, 2D, HR, CR, BA (No. 8), No. 4, Satin (Met with PVC Coated) sheet finishing. | Material | Size | Thickness | Specification | | Cupro Nickel
Hastelloy
Nickel
Monel
Inconel
Titanium
Alloy 20
S. S. 904L | 1000 mm x 2000 mm
1220 mm x 2440 mm
(4' x 8')
1250 mm x 2500 mm
1500 mm x 3000 mm
As per Requirement | 0.1 mm
to
20 mm
Thk. | IS
BS
ASTM
UNS | | Duplex | | | |
Grades:
Cupro Nickel (90/10, 70/30), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (K400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Titanium, Tungston, Moly, Kanthal, Nimonic Nichrome, Cobalt, Sanicro (28, SS 904L), etc.
Sheets & Plates In Form Of: Coils, foils, shim sheet, perforated sheet, strip, flats, blank (circle), ring (flange), etc.
Value Added Service:
• Heat treatment.
• Annealed & pickling.
• Rolling, cutting, bending, forging, minor fabrication, etc.
Test Certificate:
• Laboratory Test Certificate from Govt. Approved Lab.
• Under Third Party Inspection
Specialize:
• Shim sheet, perforated sheet (round, square) & as per your drawing.
Nickel Alloy Bar We are one of the preeminent manufacturers and suppliers of nickel alloy bars. Immensely useful for construction industries, these nickel alloy bars are offered by us in a variety of grades, sizes and finishes to choose from. Complying the industrial norms, our round bars last for long duration and available in bulk quantities at most reasonable rates.
We offer these nickel round bars according to their specifications.
StandardASTM / ASME SB 160
GradesUNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
|
|
|
